Approximate size: Bunny 10 inches (26 cm), Carrot 5 inches (13 cm).

Stitch Glossary & Abbreviations:

Increase = inc.; Chain = ch.; Decrease = dec.; Half Double Crochet = hdc.;

Single Crochet = sc.; Slip Stitch = sl st.; Back Loops Only = BLO; Front Loops Only = FLO; Place Marker = pm.; End of Round = eor; Invisible Fasten Off = Cut the yarn, pull the loop on the hook, pass it onto a tapestry needle, pass it through both loops of the 2nd stitch from the previous round, then insert the needle between the loops of the last complete stitch in the last round, bringing the yarn to the wrong side of the work, tie a knot, and trim the excess yarn.

Examples of how to read this pattern:

R0: 0 sc.; -> Single round (follow the indicated stitches).

R0 & R0: 0 sc.; -> 2 identical rounds (follow the indicated stitches).

R0 to R0 (0 rounds): 0 sc.; -> Consecutive rounds with the same sequence.

R0: 0 sc, 1 inc, (00 sc, 2 inc) 5x, 0 sc = XX sc.; -> Round with repetitions in parentheses (follow the indicated stitches and repeat what is in parentheses the specified number of times).

R0: *0 sc., 1 dec.* to eor = XX sc.; -> Round with repetition throughout (repeat what is between asterisks for the entire round).

Instructions:

Body

With Amigurumi Pelúcia yarn #8008 (Rock Corey) and 3.0 hook

Start with the legs.

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc. Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4 to R14 (11 rounds): 18 sc.

Fasten off the first leg. Make the second leg and don’t cut the yarn. In the next round, join the legs:

R15: Attach to the 1st leg with 1 sc., 17 sc. in the 1st leg, 18 sc. in the 2nd leg = 36 sc.;

Stuff the legs.

R16: *5 sc., 1 inc.* to eor = 42 sc.;

R17: 3 sc., 1 inc., (6 sc., 1 inc.) 5x, 3 sc. = 48 sc.;

R18 to R28 (11 rounds): 48 sc.

Stuff it.

R29: 3 sc., 1 dec., (6 sc., 1 dec.) 5x, 3 sc. = 42 sc.;

R30: 42 sc.;

R31: *5 sc., 1 dec.* to eor = 36 sc.;

R32: 36 sc.;

R33: 2 sc., 1 dec., (4 sc., 1 dec.) 5x, 2 sc. = 30 sc.;

R34: *3 sc., 1 dec.* to eor = 24 sc.;

R35: 24 sc.
Stuff the piece.

Fasten off, leaving a yarn tail for sewing.

Head

Start with Amigurumi Pelúcia yarn #8001 (White) and 3.0 mm hook

Start with the snout.
R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4: 1 sc., 1 inc., (2 sc., 1 inc.) 5x, 1 sc. = 24 sc.;

R5: 24 sc.

Change to Amigurumi Pelúcia yarn #8008 (Rock Corey)

R6: 6 sc., 12 inc., 6 sc. = 36 sc.;

R7: 36 sc.;

R8: 6 sc., (1 sc., 1 inc.) 12x, 6 sc. = 48 sc.;

R9 to R19 (11 rounds): 48 sc.

Place the safety eyes between rounds 6 & 7, with 13 stitches between them.

Stuff the piece.

R20: 3 sc., 1 dec., (6 sc., 1 dec.) 5x, 3 sc. = 42 sc.;

R21: *5 sc., 1 dec.* to eor = 36 sc.;

R22: 2 sc., 1 dec., (4 sc., 1 dec.) 5x, 2 sc. = 30 sc.;

R23: *3 sc., 1 dec.* to eor = 24 sc.;

R24: 1 sc., 1 dec., (2 sc., 1 dec.) 5x, 1 sc. = 18 sc.

Complete with stuffing.

R25: *1 sc., 1 dec.* to eor = 12 sc.;

R26: 6 dec. = 6 sc.

Fasten off with a reverse magic ring.

With Amigurumi yarn #8990 (Black) yarn, embroider the nose in a “V” shape between rounds 1 & 3 of the snout. For the mouth, embroider a vertical line just below the nose, between rounds 1 & 3 of the snout.

If desired, indent the eyes and chin.

Sew the bottom of the head to the body opening between rounds 12 and 17.

Embroider the eyebrows with Amigurumi yarn #8990 (Black) yarn, approximately 4 rounds above the eyes.

If desired, embroider additional details on the eyes to enhance expression.

Arms

With Amigurumi Pelúcia yarn #8008 (Rock Corey) and 3.0 hook

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3 to R13 (11 rounds): 12 sc.

Fold in half and close the sides with 6 sc.

Stuff the piece halfway up.

Sew the arms to the sides of the body at the height of round 31.

Ears (2)

With Amigurumi Pelúcia yarn #8008 (Rock Corey) and 3.0 hook

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4: *2 sc., 1 inc.* to eor = 24 sc.;

R5 & R6: 24 sc.;

R7: *3 sc., 1 inc.* to eor = 30 sc.;

R8 to R11 (4 rounds): 30 sc.;

R12: *3 sc., 1 dec.* to eor = 24 sc.;

R13 & R14: 24 sc.;

R15: *2 sc., 1 dec.* to eor = 18 sc.;

R16: 18 sc.;

R17: *1 sc., 1 dec.* to eor = 12 sc.;

R18: 12 sc.

There is no need to add stuffing.

Fold in half and close the sides with 6 sc.

Fasten off, leaving a yarn tail for sewing.

Inner Part o the Ears (2)

With Amigurumi Pelúcia yarn #3583 (Cherry) and 3.0 mm hook

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4: *2 sc., 1 inc.* to eor = 24 sc.

Fasten off, leaving a yarn tail for sewing.

Sew the patch on the bottom part of the ear. Then, sew the ears onto the sides of the head, with approximately 14 stitches between them.

Tail

With Amigurumi Pelúcia yarn #8008 (Rock Corey) and 3.0 hook

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4: *2 sc., 1 inc.* to eor = 24 sc.;

R5 to R7 (3 rounds): 24 sc.;

R8: *2 sc., 1 dec.* to eor = 18 sc.;

R9: *1 sc., 1 dec.* to eor = 12 sc.

Fasten off, leaving a yarn tail for sewing.

Sew to the back of the body, approximately between rounds 20 & 24.

Overall

With Amigurumi yarn #2931 (Nautical) and 2.5 mm hook

Make 65 ch. and join in a circle with 1 sl st. to the 1st ch.

R1: 2 ch. (count as 1 hdc.), 64 hdc., 1 sl st. in the 2nd ch. from the beginning of the round = 65 hdc.;

R2: 2 ch. (count as 1 hdc.), 11 hdc., 1 inc. in hdc., (12 hdc., 1 inc. in hdc.) 4x, 1 sl st. in the 2nd ch. from the beginning of the round = 70 hdc.;

R3: 2 ch. (count as 1 hdc.), 69 hdc. = 70 hdc.

In the next round, we will create the opening for the tail on the overall.

R4: 2 ch. (count as 1 hdc.), 5 hdc., 15 ch., skip 15 base sts., 49 hdc, 1 sl st. in the 2nd ch. from the beginning of the round = 70 stitches;

R5: 2 ch. (count as 1 hdc.), 5 hdc., 15 hdc. in the ch., 49 hdc., 1 sl st. in the 2nd ch. from the beginning of the round = 70 stitches;

R6 to R10 (5 rounds): 2 ch. (count as 1 hdc.), 69 hdc., 1 sl st. in the 2nd ch. from the beginning of the round = 70 hdc.

We will begin the division of the legs, leaving the same number of stitches on each side of the leg. Keep the tail opening centered right between the leg division.

Make one sewing stitch to secure the separation of the legs.

We will continue the leg rounds from where we left off.

Insert a yarn into one of the leg openings at the joining point.

R11 to R13 (3 rounds): 2 ch. (count as 1 hdc.), 34 hdc., 1 sl st.. in the 2nd ch. from the beginning of the round = 35 hdc.;

R14: 1 ch. (count as 1 sc.), 34 sc., 1 sl st. in the ch. at the beginning of the round = 35 sc.

Fasten off the first leg. Make the second leg by repeating from Round 11.

For the waistband finishing, insert the Amigurumi yarn #2931 (Nautical) yarn into the ch. of the waistband and work sc. around the entire round. Finish with an invisible fantes off. For the finishing at the tail opening, insert the Amigurumi yarn #2931 (Nautical) yarn into the tail opening and work sc. around the entire round. Finish with an invisible fasten off.

Overall Bib

With Amigurumi yarn #2931 (Nautical) and 2.5 mm hook

Work in back-and-forth rows.

To start the rounds, don’t go up 1 ch.; simply widen the loop on the hook to the height of one stitch.

Find the middle of the front part of the overall, count back 9 base stitches, and insert the yarn into the next stitch.

R1 to R10 (10 rounds): 20 sc. (TURN);

R11: 20 sc.

Fasten off.

Suspenders (2)

With Amigurumi yarn #2931 (Nautical) and 2.5 mm hook

Make 32 ch., skip 2 ch., and work hdc. inserting the hook only into the back loops, until the end.

Fasten off, leaving a yarn tail for sewing.

Sew the suspenders onto the front of the bib, then sew them onto the back waistband of the overall at the desired position.

Buttons (2)

With Amigurumi yarn #2927 (Aquarium) and 2.5 mm hook

R1: 6 sc. inside of a magic ring;

Make an invisible fasten off.

Sew the buttons onto the front of the overall, right above the suspenders.

Pocket

With Amigurumi yarn #2931 (Nautical) and 2.5 mm hook

Work in back-and-forth rows.

To start the rounds, don’t go up 1 ch.; simply widen the loop on the hook to the height of one stitch.

Make 7 ch., skip the 1st one.

R1: 5 sc., 1 incT. in the last ch., on the other side of the foundation ch.: 5 sc. (TURN) = 13 sc.;

R2: 5 sc., 3 inc., 5 sc. (TURN) = 16 sc.;

R3: 5 sc., (1 sc., 1 inc.) 3x, 5 sc. (TURN) = 19 sc.;

R4: 5 sc., (2 sc., 1 inc.) 3x, 5 sc. (TURN) = 22 sc.;

R5: 5 sc., (3 sc., 1 inc.) 3x, 5 sc. (TURN) = 25 sc.

Fasten off, leaving a yarn tail for sewing.

Sew the pocket onto the front of the overall, on top of the bib.

Overalls Embroidery

With Amigurumi yarn #2927 (Aquarium)

Pass the yarn onto a tapestry needle and go through the entire edge of the overall, entering and exiting stitch by stitch, creating running stitches over the crochet.

Hat

With Amigurumi yarn #7650 (Almond) and 2.5 mm hook

R1: 6 sc. inside of a magic ring;

R2: 6 inc. = 12 sc.

Note: pm. on first sc.;

R3: *1 sc., 1 inc.* to eor = 18 sc.;

R4: *2 sc., 1 inc.* to eor = 24 sc.;

R5: *3 sc., 1 inc.* to eor = 30 sc.;

R6: *4 sc., 1 inc.* to eor = 36 sc.;

R7: *5 sc., 1 inc.* to eor = 42 sc.;

R8: *6 sc., 1 inc.* to eor = 48 sc.;

R9: *7 sc., 1 inc.* to eor = 54 sc.;

R10: *8 sc., 1 inc.* to eor = 60 sc.;

R11: *29 sc., 1 inc.* to eor = 62 sc.;

R12 to R14 (3 rounds): 62 sc.

Change to Amigurumi yarn #7625 (Chestnut)

R15: 62 hdc.;

R16: 62 sc.

Change to Amigurumi yarn #7650 (Almond)

R17: *1 sc., 1 inc.* to eor = 93 sc.;

R18 to R20 (3 rounds): 93 sc.;

R21 – FLO: 93 sc.

Make an invisible fasten off.

Flowers (As many as you wish)

With Amigurumi yarn #8001 (White) and 2.5 mm hook

R1 (inside of a magic ring): (5 ch., 1 sc.) 5x.

Close the magic ring to adjust and make an invisible fasten off.

With Amigurumi yarn #1205 (Magnolia) on the tapestry needle, make a four-loop French knot in the center of the flower.

Fasten off inside the flower with a knot and sew it onto the top of the hat.

Carrot

With Amigurumi yarn #4445 (Tangerine) and 2.0 mm hook

R1: 6 sc. inside of a magic ring;

R2: 6 sc.

Note: pm. on first sc.;

R3: 6 inc. = 12 sc.;

R4 & R5: 12 sc.;

R6: *1 sc., 1 inc.* to eor = 18 sc.;

R7 & R8: 18 sc.;

R9: *2 sc., 1 inc.* to eor = 24 sc.;

R10 to R30 (21 ounds): 24 sc.;

R31: *2 sc., 1 dec.* to eor = 18 sc.

Stuff the piece.

R32: *1 sc., 1 dec.* to eor = 12 sc.;

R33: 6 dec. = 6 sc.

Fasten off with a reverse magic ring.

Leaves

With Amigurumi yarn #5368 (Forest Green) and 2.5 mm hook

R1: (14 ch., skip 1 ch., 10 inc., 3 sc.) 8x.

Fasten off, leaving a yarn tail for sewing.

Sew on top of the carrot.

Created by: Gabrielle Oliveira (@estrelinhapreciosa)

Pattern review by: Patty Wolf